|
Repairing an Over Cut
Mixing small batches of Mold & Casting Compound may require a little practice. The trick is to control the spreading of the mixture, on the mixing surface, while stirring and blending catalyst into the mixture. Think: “chop and role”.
25. With pallet knife, glass work surface, M&CC Paste and catalyst: Use pallet knife to dip out a small portion of Mold & Casting Compound Paste, and place it on the glass work surface. Add appropriate amount of catalyst. Using the pallet knife; use a chopping motion to blend in the catalyst. The puddle of mixture will tend to spread out as you chop in the catalyst. Use the pallet knife to role the mixture inward into itself. Fig. 18.
|