|
DESPRIPTTION
Figure 1.
Industrial Polymers Inc., Poly-wood. Poly-wood is a Urethane Polymer (RTV) that when cured, has nearly identical qualities as a dense balsa-wood.
Personally; I prefer to make lures from Poly-wood. The reason Poly-wood is my second choice in lure making materials is because this material requires a larger set-up investment than PVA.
As your lure making guide; I will suggest that beginner lure makers stick to the PVA Systems before advancing to Urethane Polymer Systems.
The Design Drawing Elements: Fig. 1.
A. Solid Polywood Body.
B. Ballast adjusting cavities.
C. Pre-formed brass hook eyes.
D. Pre-formed and trimmed wire line eye.
E. LEXAN (or other) Diving Bill.
F. Glass Ticker.
The Design Drawing Elements: Fig. 2.
#1. The Solid PVA body.
#2. A shallow angle diving bill.
#3. A single ball, glass rattle (ticker).
#4. A 1/8th to 3/4 Oz. Slip sinker.
#5. A :break-&-shake” light stick.
#6. A 3D eye socket.
#7. The air bladder. (Can be filled with liquid, or paste scenting materials.
#8. The laser cut steel hook-set, harness plate.
Reference: Bottom Jigs for glass ticker placement.
Figure 2.
PVA - SOFT BODY CRANK-BIATS.
PVA (Poly Vinyl Acetate) has been around for a long time. PVA is a common hot melt adhesive primarily used in the packaging industry. Most people are familiar with PVA as the common hot melt, glue stick. There are over 30 different formulations of packaging PVA; from worm-like soft, to near brittle. Some are crystal clear, and some are opaque colors. The inherent qualities of PVA make it the ideal, low cost, and easy to use material for Making solid, but flexible clear plastic lure bodies.
|